1

Unplug the Whirlpool washing machine from the wall outlet and turn the water supply off in the wall spigot. Pull the washing machine away from the wall so that you can work behind it.

2

Place a bucket underneath the water hose connection in the rear in the washing machine. Disconnect the water hoses from the rear with the washer and location them inside the bucket.

3

Remove the two end screws that secure the front of the control panel for the Whirlpool washing machine. If there is decorative trim covering the screw heads, pull it off to gain access to the screwsHow to Get rid of a Whirlpool Washing Machine Cabinet.

4

Push the bottom from the control panel to disconnect it from the washer best and flip the manage panel back. It will rest on hinges in the service position.

5

Insert a screwdriver into the two clips inside the slots in the rear with the best panel. Push down and then toward the wall together with the screwdriver to release the clips. Take away Washing Machine Repair the clips by unhooking them from the back panel and set them aside on the counter. This will ensure that the clips don't fall off the rear panel and become lostHow to Get rid of a Whirlpool Washing Machine Cabinet.

6

Press in the locking tab on the wiring harness Fix Washing Machine Problems in the center rear with the prime panel to disconnect the wires. This is the wiring harness towards the door switch.

7

Lift the rear from the cabinet up and pull it away from the Whirlpool washing machine base.

How To Remove A Whirlpool Washing Machine Cabinet