How To Take A Whirlpool Washing Machine Apart | bestwashingmachinex.com

1

Disconnect the energy provide from the Whirlpool washer by unplugging it from homepage here the wall outlet. Turn the water supply off to the washer as well

2

Place a bucket underneath the water hose connection at the rear of the washer. Twist the hose connections counterclockwise to get rid of the hoses from the washer. Pliers may Clear Away Washing Machine Smells be needed to aid in twisting them off. Place the ends inside the bucket to catch any residual water.

3

Use a Phillips-head screwdriver to remove the two screws that hold the control panel to the top rated with the washer. Flip the control console back into its service position.

4

Disconnect the lid switch harness by pressing in on the plastic tab and pulling it apart. The lid switch harness is positioned directly beneath the control console on the rightHow to Take a Whirlpool Washing Machine Apart.

5

Insert a flathead screwdriver into the mounting clips on the top rear of the washer. Press in on the clips and pull them out from the retaining hole using the screwdriver.

6

Open the lid towards the washer and grab the washer with one hand between the tub as well as the washer cabinet.

7

Tilt the cabinet forward and release it from the bottom clips and lift the cabinet over the tub and away from the work area.

8

Twist the rear panel support back 90 degrees and tilt the panel back out with the way from the washer componentsHow to Take a Whirlpool Washing Machine Apart.

How To Take A Whirlpool Washing Machine Apart | bestwashingmachinex.com

How To Clean Hard Water Deposits From The Washing Machine